How to Turn On the Video Adapter

Video card is a special card, with which the information is displayed on the computer screen as an image. The video adapter is connected to the motherboard and recognized by the BIOS firmware ("Basic Input Output System"), which was the first run when the computer starts. However, in some cases, the BIOS does not be seen the plug-in board. In this case, it should be included in the BIOS manually. You will need computer running an operating system, and graphics card (e.g. V8.0 EXP GDC).

Turn on or restart (depending on the order in which it is able to) your personal computer. After pressing the computer is turned on or reset buttons periodically press the «DEL» or «F2». After activation key you get into the BIOS menu.

Browse BIOS Forums, you can find the section from the menu on the video card settings. Since the BIOS options are many, simply targeting a word Video, Graphic, Display, VGA. In this section, you need to configure the download of a new video card first, and also to restore, if necessary, all downed settings.

To do this, set the settings as follows. According to the video card type, VGA, Paragraphs, Primary Display, and Video, in connection bus - depending on the type of tire, for which the necessary graphics card connected: PEG (PCI Express 16x), IGD (integrated graphics), PCI, AGP. Paragraphs include Boot Graphic Adapter Priority, Booting Graphic Adapter Priority, Graphic Adapter Priority, Init Display First, Init. Graphic Adapter Priority, Initiate Graphic Adapter, Primary Display Adapter, Primary Graphics Adapter, Primary VGA BIOS, Primary Video Adapter, Primary Video Device, VGA BIOS Sequence, VGA Boot From. You can get the PCI cards replacement at Banggood, as well as other computer accessories, for instance, cheap Bluetooth Dongle, etc.

After configuring those items that are in the version of the BIOS of the motherboard, according to the video card, exit the firmware BIOS through the item «Save & Exit Setup», choose «Exit & Save Changes» and confirm saving your changes by clicking "Yes". After the reboot, turn on the video adapter installed.